nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Connection from modem to ICX -7150-C12P? What port?

armandotop

Where do i connect provider modem cable to ICX -7150-C12P? What port?

Find more posts tagged with

Accepted answers

All comments

Smiley

Hi armandotop1

Thank you for reaching us.

Could you please let me know if you are from Lennar Homes ?

However, based on your description you can refer below links which might be helpful:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lenna...

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-38BF9026-D6E4-4606-BE1D-89FE15474AC...

Thanks,
Smiley Gupta

armandotop

Yes Smiley, i am a Lennar home owner. Eveything was working fine until i changed my provider from Spectrum to GVTC. Trying to figure out where should the cable be plugged in to my ICX 7150 C12p. Which port?

I have no router.

R S

MSgt Armando Ortiz USMC ret.

armandotop

The cable coming out of the modem to the ICX 7150. Which port? (Forgot to mention this)

armandotop

The links provided do not open…

imran.sanadi@commscope.com

Hi @armandotop1

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

Hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that your RUCKUS setup is not working after changing the ISP (Internet Service Provider)

Please note, if your ISP MODEM is directly connected to the ICX-7150-C12P Switch, it doesn’t work only with Modem. The connection must be from a Router or Modem-Router combo device. Could you please check and confirm this once?

Please refer to the short guide link below about how to connect the devices as a reference:

Most common Setups for Lennar homes users:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lennar-homes-users/td-p/47106

Please check and let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

armandotop

Sorry for the delay. This is my modem description:

GigaSpire BLAST u6.1

Deliver amazing Wi-Fi coverage, with support for hard-wired connectivity

The GigaSpire BLAST u6.1 is a new generation, ‘Wi-Fi CERTIFIED 6™’ EDGE System that integrates the latest and greatest ‘Wi-Fi 6’ technology (802.11ax).

Product attributes

6x6 Wi-Fi 6 antenna array, with 4x4 @ 5 GHz and 2x2 @ 2.4 GHz
4 x GigE LAN ports
1 x GigE WAN port
2 x POTS ports
1 x USB 3.0 (Type A)
Enhanced PuF security
Managed by Calix Support Cloud

GigaSpire BLAST u6.1

Deliver amazing Wi-Fi coverage, with support for hard-wired connectivity

The GigaSpire BLAST u6.1 is a new generation, ‘Wi-Fi CERTIFIED 6™’ EDGE System that integrates the latest and greatest ‘Wi-Fi 6’ technology (802.11ax).

Product attributes

6x6 Wi-Fi 6 antenna array, with 4x4 @ 5 GHz and 2x2 @ 2.4 GHz
4 x GigE LAN ports
1 x GigE WAN port
2 x POTS ports
1 x USB 3.0 (Type A)
Enhanced PuF security
Managed by Calix Support Cloud

GigaSpire BLAST u6.1

Deliver amazing Wi-Fi coverage, with support for hard-wired connectivity

The GigaSpire BLAST u6.1 is a new generation, ‘Wi-Fi CERTIFIED 6™’ EDGE System that integrates the latest and greatest ‘Wi-Fi 6’ technology (802.11ax).

Product attributes

6x6 Wi-Fi 6 antenna array, with 4x4 @ 5 GHz and 2x2 @ 2.4 GHz
4 x GigE LAN ports
1 x GigE WAN port
2 x POTS ports
1 x USB 3.0 (Type A)
Enhanced PuF security
Managed by Calix Support Cloud

Wanting to know if i can connect to my Ruckus ICX 7150 C12P without a router and if so. Which port do i plug into?

R S

MSgt Armando Ortiz USMC ret.