BACK TO SUPPORT PORTAL
RUCKUS Technologies
Wired
Wireless
Cloud Services
Miscellaneous
RUCKUS Lennar Support
Lennar Knowledge Base
RUCKUS Lennar Support
Resources
Community
Technical
Register
RUCKUS Technologies
Home
RUCKUS Technologies and Products
Access Points - Indoor and Outdoor
VPN between 2 office with one ZD
unknown
Im going to set up a site-to-site vpn between two offices that we have.
Is there any best practice how to arrange this?
Im need the APs on office 2 to be managed by the ZD in office 1
Is it possible to change that all WLAN users in office 2 will get IP from office1:s DHCP server ?
Office1
DHCP server
Ruckus Zonedirector ZD3025
Ruckus 7363 AP
Office 2
Ruckus 7363 AP
Find more posts tagged with
Accepted answers
All comments
harish_kumar_56
Hi Emil,
DHCP is not routable by default, and DHCP is always a broadcast packets. so the the DHCP request will be dropped in office 2's Router by default.
If you enable DHCP Relay agent in the router's then the Broadcast packets which are received in the routers are converted into uni-cast and directed to the DHCP server in office 1.
So the clients /AP in office 2 can use the same DHCP services which is available in office 1.
I hope this is helpful.
unknown
Thanks for the reply.
Will the ZD in office 1 find the APs in office2 with out any problems?
Do we need to open any specific ports to make this work when using a VPN tunnel?
unknown
Emil, you have to make sure if AP is crossing L3 boundaries then you need to fix the ZD IP in AP via CLI using below command so AP will find the ZD for sure.
set director ip primaryip secondaryip
Example: set director ip 0.0.0.0
take a look at this KB article -
https://support.ruckuswireless.com/an...
for more info
About ports: you need to have LWAPP UDP ports open on your firewall/router.
Also ensure that latency of your VPN is less than 100ms.
unknown
To answer your original question:
Is it possible to change that all WLAN users in office 2 will get IP from office1:s DHCP server ?
I think it is doable if VLAN id is tagged to WLAN which is being broadcasted at office 2 and WLAN Tunnel mode are used.
How to enable tunnel mode on WLAN --
ZD GUI --> WLAN --> configure --> SSID--> advanced options
Hope it helps.
unknown
The vpn is up and running and i configured the ap:s to find my ZD.
But i have a big issue.
When using WLAN i get massive latency. Everywhere from 70ms-1500ms.
This is both laptop and handheld computer.
When using the lan-cable i get around 40ms to my ZD over vpn.
Any idea?
harish_kumar_56
Hi Emil,,
The most popular problem with VPN connections are MTU issues. Try a ping -l 1500 internal-ip. If that doesn’t work, you have an MTU issue.
Try to decrease MTU size to 1300 and see if that makes any difference.
The next step is to test the raw speed – copying a file with FTP to and from a server. Is the speed okay? If the speed is according to the lines used, your problem probably isn’t with the VPN connection.
All the best.
Quick Links
🗂️ All Categories
📄 Recent Posts
❓ Unanswered
🆘 Help
Tags
SmartZone or vSZ
RUCKUS Self-Help
Cloudpath
ICX
AP Management
vSZ
Access points
ICX Switch Management
Lennar homes
SmartZone
