nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

After power outage, no power to unit or APs

DaveU

Have tried the steps in previous posts, and believe and RMA is the next step

Find more posts tagged with

Accepted answers

All comments

DaveU

After reaching out to the chat function, I was told I needed to walk through the steps here and then provide the URL with the RMA information

DaveU

Unit is ICX 7150-C12P

Jayavidhya

Hi @DaveU

Greetings of the day,

For further troubleshooting steps could you please provide the detailed description of the issue?

Also please share the image of the switch and the access points showing the LED status and the cable connections.

Here is where you can upload the image/photo :

you can also drag it to the chat

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

DaveU

I was able to finally get the switch to power on after swapping cords and outlets, however, connectivity issues remain. attached are the current LEDs I am seeing