ICX7150s Not Powering WAPs

Jemalsimmons

I power reset my ICX 7150 yesterday and since I've been trying to figure out, by using post from this forum, if my switch is working properly or not. After the power reset I've attempted to tftp into the switch to verify the configuration and/or it's settings to no avail. Does anyone have a procedure I can use to console or tftp into the switch to determine if it's operational or not? Is there a YouTube video that details the right steps to take with this switch? Where would I go to find the correct settings for a ICX7150? In this day and age I find it crazy that this information isn't at an easily located site somewhere, like this forum.

Jemal Simmons

Jayavidhya

Hi @Jemalsimmons 

 

Greetings of the day,

 

For detailed understanding of the issue please let us know the LED status of the switch and the access points using the below guide.

 

R510 LED lights

https://docs.commscope.com/bundle/unleashed-200.12-onlinehelp/page/GUID-19D4261B-D10B-4DE3-B63A-3498F80103D0.html

 

 

RUCKUS LED lights

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-973C8AE8-837A-41C7-9811-BAEF6ADEF3D3.html

 

 

Also please share the image of the switch and the access points showing the LED status and the cable connections.

 

Here is where you can upload the image/photo :

 

you can also drag it to the chat.

 

Please let us know if you have any queries in this regard.

 

 

Best regards,

Jayavidhya

Lennar Home Community