Hello - I received my replacement Switch and wondering if i need to do anything special to set it up? Do I just hook up the wires as before? what should the lights look like if working correctly? Thanks.
the power light is flashing green, the Ctl light is flashing green, and no other lights are on.
I unplugged and reconnected. Now getting solid green on power, no light on ctl, 3g orange, 5g orange. ,
Hi Busch007
Thank you for reaching us
Below is the link with details about how to access switch using console for reference:
Thanks
Hello - here are the answers to your questions:
- yes, I am a lennar home owner
- switch model icx 7150-c12p
- would like to get 3g and 5g working on access points r510x3 and go from orange lights to green
-I have unplugged the wires once and set up as before. I’ve tried this twice. Picture attached.
Hi @busch007
Greetings!!!
Thank you for contacting RUCKUS Lennar Home Community.
Hope you are doing well!!!
Thank you for the information you shared.
As per the case description, I understand that you are trying to set up your new RUCKUS ICX-7150-C12P Switch.
From the pictures you shared, as per the light status and the cable connections, they seem to be normal. Are you able to see a Wi-Fi SSID broadcasted from your RUCKUS R510 Access Points and connect to the Internet with the same?
Please note, that Amber lights on 2.4G and 5G is a normal behavior.
If 2.4G and 5G lights are amber, it states that the connectivity is up and there are no devices/clients connected. When any device/client connects to the 2.4 or 5G radio the lights turn green. Please refer to the below link for more information about the light status of the RUCKUS R510 Access Point.
https://docs.commscope.com/bundle/unleashed-200.9-onlinehelp/page/GUID-19D4261B-D10B-4DE3-B63A-3498F80103D0.html
Please refer to the short guide link below about how to connect the devices as a reference:
Most common Setups for Lennar homes users:
https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lennar-homes-users/td-p/47106
Please check and let me know if you have any queries in this regard.
Thank you again for your patience.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
Here are pics of the lights. The power flashes green every second or so. The 3 g and 5 g lights are not on or no green.
Yes, both 2.4 and 5g are amber. The air is black. I will try to reboot them.
Greeting!!!
Thank you for the response and the update.
Sure, please let me know the status once you reboot.
Also, could you please let me know if your internet connectivity via RUCKUS devices is working fine?
Please confirm and let me know if you have any queries in this regard.
Thank you again for your patience and understanding.
i am able to access the internet. My fear is that i'm just accessing my modem up on 3rd floor and not really using the Access Points in my 3 level house since they are all orange for 3 g and 5 g all the time. Is there a way to check or force a log on to one of the access points?
Greetings!!!Thank you for the response and the information you shared.
This is something that you can easily get to know based on, to which Wi-Fi SSID name/network your Mobile or any wireless device is connected, whether to the Wi-Fi SSID that is broadcasted from your ISP’s (Internet Service Provider’s) Router or from the RUCKUS Access Points.
However, if you need more detailed information, you can check the Wi-Fi SSID details from the Unleashed system login and when a device is connected you can check which devices/clients are connected to a particular SSID you configured in your Unleashed system. Please refer to the below screenshot for the same.
Please let me know if you have any queries in this regard.
Thank you. So I see the the ip address and router info when connected on my phone. How do I tell if that is the isp router vs access points? How do I find the access point addresses?
Thank you for the response.
As mentioned in my previous post, please check the detailed information by logging into the Unleashed system.
Thank you again.
I’ve downloaded the unleashed app but can’t get the Wi-Fi configure me to appear
Thank you for the response and the information you shared.
Please note, configure.me is for the factory reset of the Access Point.
Could you please connect to the RUCKUS Wi-Fi network and try logging into your Unleashed system on a web browser using the Master AP IP Address or https://unleashed.ruckuswireless.com/ ? If you are able to log in, then you can see the Wi-Fi network information and also you can log into the Application using the same login credentials.
Please refer to the below screenshots for more information on how to know your Unleashed Access Points version details.
Hello - It is a wi-fi network and not sure what password to use.
I hope you are doing well!!!
Please note, that this post thread is old and is now closed.
To avoid confusion with the post thread, please raise a new post with a detailed description of the issue.
Thank you again for your understanding.
