Reboot

Question

Please give me instructions to reboot

sanjay_kumar · Answer

Hi @CourtneySnow

The AP reboot can be done by either from the CLI or GUI.
From the AP CLI (SSH access) you can use the command "reboot"

From the GUI:
If the controller is SZ\vSZ:
1. Go to Access Points tab >> Select the AP >> Click on More >> Click on Restart

If the controller ZD:
1. Go to Access Points tab >> Select the AP >> Click on More >> Click on Restart

If this is Unleashed :
1. Go to Access Points tab >> Select the AP >> Click on Restart