Radius Proxy on vSZ

Question

Hi Everyone,

I have setup a WLAN with a WISPr profile (external Portal). 
I am currently redirected correctly to the captive portal, however I cannot authenticate because the my Radius Server is not reachable from my vSZ which is acting as a Radius Proxy for the auth requests.
I would like to know if it is possible to make the APs authenticate the user directly without going through the vSZ.

PS: I have configured the Radius server on the WLAN configuration and unchecked the "use the controller as a proxy" in the WLAN configuration

Thank you in advance

unknown · Answer

Have not tested yet, but here is how to do it:

Here's what you need to do to map the authentication service for RADIUS proxy mode:

Login to vSZ-H >>Configuration >>Services & profiles >>Under >>service profile >>Authentication>>You have to create a profile: Give profile Name >>Clicked on "No match ">>select authentication service (proxy mode server) which you have created under Services>>Authentication, kindly map it >>Select auth method >>Non-3Gpp call Flow >>click apply. 
Repeat same for Unspecified:
Click on Unspecified >>Select the service as your Authentication profile  >>choose Non-3gpp call flow >>Click apply..

Now go to AP zones >> WLAN >> edit WLAN configuration for which You need to use RADIUS proxy server >> under Authentication Service select checkbox: Use the controller as a proxy and You should be able to choose profile You created above.

Hope this helps.

unknown · Answer

I have added RADIUS proxy server under Configuration-> Services&Profiles->Services-> Authentication
But I am not seeing it under APzone->WLAN-> WLAN configuration->Authentication Service: It is simply not showing up there. Have I missed something?
Under APzone->AAA I can create non-proxy mode RADIUS and thats shows up correctly, but I want to use proxy mode RADIUS.

I use vSZ-H v3.2.1.0.193
Thanks in advance for hints.

unknown · Answer

Version 3.2 of the SmartZone has a Non-Proxy AAA mode where the AP's can talk directly to the RADIUS server. In previous versions it is also possible to allow the AP's to use AAA as I have done this. What version of the vSZ are you using?