My Ruckus ICX-7150 -C12P syst light is yellow and ruckus indoor APs is not powering on

yuwenchen

My Ruckus ICX-7150 -C12P syst light is yellow and ruckus indoor APs is not powering on (No wifi at home).

I tired following

1. Please try to disconnect from the Power outlet the ICX-7150 and reconnect.

2. Please try to press the reset button using a paper click or a small stick 

• Remove power from the switch.
• Press and hold the Reset button while applying power to the switch.
• After all the system LEDs flash amber, release the Reset button.

For number 2, all the system LEDs flash more than 2 hours, and still flashing. Nothing how to fix it. Could someone help?

Jayavidhya

Hi @yuwenchen 

 

Greetings of the day,

 

Thanks for your detailed description.

 

Based on your description your switch has one green and one yellow light, it means that the switch is stuck in boot mode.

 

If the resetting process doesn't work we need to perform software recovery process. Please follow the below link on how to perform software recovery process.

 

Here is the quick guide to perform software recovery.

 

How to perform a Software recovery on an ICX7150 switch

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-a-Software-recovery-on-an-ICX7150-switch/m-p/47483

 

Ruckus ICX Recovery Load boot code from boot monitor

https://www.youtube.com/watch?v=RHriOYYD_iI&t=7s

 

Please let us know if you have any queries in this regard.

 

Best regards,

Jayavidhya

Lennar Home Community