nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

I currently have a wireless network with a ZD1200 and r710 and r510 AP's. ZD refuse clients after 100 per AP. Please help!!!!

unknown

Find more posts tagged with

Accepted answers

All comments

unknown

Check under your Access Point Group settings. There is a setting for Max Clients per AP.

unknown

https://www.dropbox.com/s/okijfrt28b6dzko/2.2017-11-10%2015_43_47-Access%20Points%20-%20admin%40185....

https://www.dropbox.com/s/uw0znm7cdbl3qe3/3.2017-11-10%2015_44_50-WLANs%20-%20admin%40185.165.223.11_8000%20-%20ZoneDirector.png?dl=0

https://www.dropbox.com/s/bcytdc9jirnt4en/2017-11-09%2016_20_17-WLANs%20-%20admin%40185.165.223.11_8000%20-%20ZoneDirector.png?dl=0

https://www.dropbox.com/s/3u3gn3cm8d73vzb/2017-11-09%2016_21_12-Access%20Points%20-%20admin%40185.165.223.11_8000%20-%20ZoneDirector.png?dl=0
Image_ images_messages_5f91c440135b77e2479ea0c0_f282a14c2404a52c6fe4e3d2b0cd0582_RackMultipart20171111109895149-c572928e-073a-4fd1-bdeb-72e48b465c29-432736088.png1510419587

Image_ images_messages_5f91c440135b77e2479ea0c0_f282a14c2404a52c6fe4e3d2b0cd0582_RackMultipart20171111109895149-c572928e-073a-4fd1-bdeb-72e48b465c29-432736088.png1510419587

Image_ images_messages_5f91c440135b77e2479ea0c0_768cef00807f0bc80f714de34167110e_RackMultipart2017111167260hybo-8fbafab5-e420-4f7b-95de-dbeb160a273c-1152420156.png1510419599

Image_ images_messages_5f91c440135b77e2479ea0c0_80ebfa36f28f9631244933e02b1ace5d_RackMultipart2017111141344rv5w-13de9800-461c-42f5-953f-0acea1a5bc01-297678134.png1510419614

Image_ images_messages_5f91c440135b77e2479ea0c0_94c702888b344c337c446db2097105b4_RackMultipart201711114339f9g9y-7777814c-62c4-400c-a4bd-acd39bba4ac4-1563719753.png1510419631

unknown

is 512 now..still no work

unknown

Check you selected the correct model from the drop down above the setting.

unknown

Please for more info. Which model and where... drop down....?

unknown

In the grey bar above setting for Model Specific Control you should see the dropdown. In your screenshots it is defaulting to zf7055

unknown

Great, I cannot believe I am such a sheep... Thank you, a lot! Tomorrow I am going to text you if everything is ok, when the clients are back. However, in this group I have two models, would that be a problem....
I love you 😉

unknown

I assume you updated both model types to the new limit. Can't claim to be an expert so would expect this to work. Call to Ruckus Support may be required.

unknown

Work great!!! You are the best!!!