Multiple SSID in Ruckus ZF7372

Question

Hi All,

can i configure multiple SSID with different VLAN in Ruckus Zoneflex7372 without ZoneDirector?

unknown · Answer

SSID 1 is working..

this is information IP address use SSID 1

Default gateway is IP Adress VLAN 80.

unknown · Answer

the isssue is if i connect use SSID 2 gateway not ip address VLAN 30 (10.10.0.45), ip default gateway is local ip address from local subnet 2.

this is configuration in my extreme switch :

port 7 is port 1 in Ruckus with Vlan 80

port 5 is port 2 in Ruckus with Vlan30

this is VLAN Table

unknown · Answer

Configuration looks right to me and cannot test at this point of time as i am at a site visit.

could you please temme just to be sure what is working and what is NOT?

Also did you try swapping the VLAN info from working to not working SSID to see if that starts to work? this is just to confirm that configuration on AP is ok and NOT some switch VLAN config issue?