nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Smart Roam on Unleashed AP's

unknown

Anyone Use Smart Roam on an Unleashed Network? Is it in a firware revision? I can't seem to find the option. On Zone Director networks it was always just a checkbox.

Find more posts tagged with

Accepted answers

All comments

unknown

on controller based solution,, SMART ROAM was cli based.
on unleashed - CLI is NOT supported as per my knowledge..
as per feature list supported on unleashed as per firmware version 200.2 - smart roam is NOT listed ...

The Ruckus Unleashed platform provides many of the same features that are currently
available using a ZoneDirector wireless LAN controller:

Smart Mesh
One-step firmware upgrades of the entire network from a single interface
Layer 2 roaming
Zero-IT support for automatic configuration of client WiFi settings
Dynamic Pre-Shared Keys (DPSK)
802.1X EAP authentication using an external AAA server (RADIUS)
HTTP-based Captive Portal
Hotspot (WISPr) WLANs
Guest Access WLANs
Bonjour Gateway
WLAN encryption/authentication options:
- Open + None
- Open + None + MAC Auth
- Open + None + Web Auth
- Open + WPA2 + AES + PSK
- Open + WPA2 + AES + DPSK
- 802.1X + WPA2 + AES + AAA
Radio Frequency (RF) management features:
- BeamFlex
- ChannelFly
- Background Scanning
- Automatic Channel Selection based on ChannelFly or Background Scanning
- Band Steering
- Client Load Balancing
- Rogue AP detection
DHCP server (configured manually from Unleashed Network Master AP)
Automatic Master AP Selection
- One Ruckus Unleashed AP serves as the "Master AP," one of the member APs will take
  over controller functions if the Master is unreachable.
Access Control Lists
Application Recognition. The following pie charts are provided:
- Top 10 clients by application
- Top 10 applications used in the network
HTTP/HTTPs redirect
Up to 512 local users supported (on the internal database)
Up to 512 client devices supported (depending on encryption/auth method)
SNMP
Management IP Interface
Multi-language support
Social Media login (Facebook, Google)
Self-Service Guest Pass
WLAN Prioritization

unknown

Hi Jason, have you found where this smart roaming feature is in the unleashed administration panel. i to was looking for the check box so my devices can always stay connected to the AP with the strongest signal. thanks!

unknown

Folks, is my understanding correct that from the firmware version 200.2, smart roam is not supported. If so, how is smart roaming done in 200.5. I am facing a problem where in 200.1, I set the smart-roam to 4. But after upgrade to 200.5, I am not able to see the smart-roam setting in the CLI. I am also not able to set this value in the 200.5 CLI. Can you please help?

unknown

Hi , I cannot found smart-roam in CLI also. And I saw the SmartRoam = Disabled on the CLI status.
Would you can help? Thanks.

unknown

Can we get an idea when Ruckus will get SmartRoam working for the Unleashed products? We're having some pretty major issues with clients hanging onto the bad signal for far too long. I know in the support doc that it says it currently isn't supported. http://docs.ruckuswireless.com/unleashed/200.1.9.12/?_ga=2.117780929.917355351.1511879159-1396168535...

Unfortunately, there's no date stamp to determine when the doc was written...We have the R510 here.

Note: Some features, including SmartRoamTM and Self-Service Guest Passes, are not currently supported, but are planned for a future release.

unknown

Smart-roam is enabled in 200.5.x.x, has to be done by CLI (ssh) per WLAN (SSID) on the master AP.

unknown

jesper,

would you mind sharing those commands here...
I don't have a unleashed device at this moment to test however wud b interested to test them out when i have them...
are they similar to whats there in controller commands??

unknown

Yes, it had smart roam command .
Under wlan config , type smart-roam . it will enable smart-roam function.