Switch stuck in boot mode

Question

Troubleshooting.

1.  Disconnected power to the switch; nothing changed.

2. Tried to connect via com port via putty; did not work

3. Tried to reset device by unplugging switch and pushing reset button as per instructions; did not work.

Please advise,

Jayavidhya · Answer

Hi @Silverbullet

Thanks for the response.

If the resetting process doesn't work, we need to perform a software recovery.

Here is the quick guide to perform software recovery.

How to perform a Software recovery on an ICX7150 switch

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-a-Software-recovery-on-an-ICX7150-switch/m-p/47483

Ruckus ICX Recovery Load boot code from boot monitor

https://www.youtube.com/watch?v=RHriOYYD_iI&t=7s

If you find any difficulties or error while following the steps please share the screenshot of the image you are getting.

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

Silverbullet · Answer

Also, I had received this switch as a replacement for the original one.  #01372069 was the case number in case you need to verify.   The S/N for my switch is:  FEK3849Q0BA which I received last year which was replaced SN : FEK3836R080 which was struck in router mode.

Silverbullet · Answer

GM:  Thanks for getting back to me.   R510 LED Lights:   There are no lights on the any of the APs; zero activity.   RUCKUS LED Lights:    There is a solid amber light and green light on the switch.  All other connectivity lights are off.  I have reseated and tried moving the cables to different ports on the switch to see if that may be the problem.