So I tried all the resets and links the people here said to do to reinstall the image but they have this link https://github.com/peacepenguin/tftpd64/releases. Which isn’t even a working link. So what am I supposed to do? I’m really annoyed and pissed off at ruckus and lennar because you can’t just get the help you need.
Hi @Jhiggins91
Greetings of the day,
For further troubleshooting please let us know the LED status of the switch and the access points using the below guide.
R510 LED lights
https://docs.commscope.com/bundle/unleashed-200.12-onlinehelp/page/GUID-19D4261B-D10B-4DE3-B63A-3498F80103D0.html
RUCKUS LED Lights
https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-973C8AE8-837A-41C7-9811-BAEF6ADEF3D3.html
Please let us know if you have any queries in this regard.
Best regards,
Jayavidhya
Lennar Home Community
One green light and one orange light on the switch. No lights at all on AP
Basically if the switch has one green and one yellow light, it means that the switch is stuck in boot mode.
1-Please try to disconnect from the Power outlet the ICX- 7150 and reconnect it.
2-Please try to press the reset button using a paper click or a small stick
https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-D3B5DB74-53A7-4F8D-82F9-6EB600879EE...
Video link:https://www.youtube.com/watch?v=6jHMTdo_hK4
If this step doesn't work, we need to perform a software recovery.
Here is the quick guide to perform software recovery.
If the resetting process doesn't work, we need to perform a software recovery.
How to perform a Software recovery on an ICX7150 switch
https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-a-Software-recovery-on-an-ICX7150-switch/m-p/47483
Ruckus ICX Recovery Load boot code from boot monitor
https://www.youtube.com/watch?v=RHriOYYD_iI&t=7s
Note: after fixing the issue of the Switch been stuck in boot mode, please perform an upgrade to the code 08095g UFI and upgrade both partitions with the switching code file named SPS08095gufi.bin, so perform the software recovery using the code 08090k with the upgrade image file named SPS08090k.bin, then when the switch is back to normal upgrade to the file SPS08095gufi.bin for both partitions primary and secondary.
1.Upgrade a Switch ICX-7150-C12P using a USB flash drive
https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-using-a-USB-flash-drive/td-p/46781
2. Upgrade a Switch ICX7150-C12P via TFTP
https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-via-TFTP/m-p/47187
3. Upgrade a switch via Web GUI (ICX7150 Switch)
https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-via-Web-GUI-ICX7150-Switch/td-p/48200
Okay so I’m trying to do this via flash drive but I don’t understand how to get to user exec mode since I can’t get an ip from the switch
Please find the below link on how to find the IP address of the switch.
How to find my Ruckus “Devices IP address” using free applications
https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-find-my-Ruckus-Devices-IP-address-using-free-applications/m-p/47027
If you face any difficulties while following the steps please share the screenshot of the error you are getting.
I am using secureCRT and I was able to connect to the switch but now this is all I’m getting I can do anything else.
