nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Ruckus ICX 7150-C12P failed - no lights

aelfert

I have a ICX 7150-C12P that abruptly stopped working. When I power cycle it, I get all amber lights to flash but then no lights after that.

I have changed the power cord, plugged it into a confirmed good outlet, held the reset button in while powering it, releasing the reset button after the amber lights flash.

Looking at other posts, I have done all the troubleshooting I can.

What is the next course of action? This unit is from 2018, Lennar home, with S/N FEK3238N0AY.

Find more posts tagged with

Accepted answers

imran.sanadi@commscope.com

Hi @aelfert

Thank you for sharing the requested information with pictures and a video.

Based on the troubleshooting done, your ICX-7150-C12P Switch is not powering up, and when plugged in, it flashes an amber light and then goes dark with no power. Also, you tried to reset the Switch. And you confirm that the Switch is plugged into a well-known outlet/power source also tried with different cords. However, the failure persists. This unit Should be RMA (Return Merchandise Authorization) in simple words replacing it.

Feel free to contact us via chat, comment you already have a post, copy the link from the post (URL) and paste it into the chat to start the unit replacement.

Please follow the below steps as shown in the below example:

As shown in the below picture, copy the link and share it via chat from the link provided below:

The below link is to contact us by chat (only)

https://support.ruckuswireless.com/contact-us

NOTE: Please feel free to mark the post as ACCEPTED SOLUTIONS.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Have a great weekend ahead.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

All comments

imran.sanadi@commscope.com

Hi @aelfert

Greetings!!!

Thank you for contacting Lennar Home Community.

Hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I could understand that your RUCKUS setup is not working.

Could you please let us know the answers to the below queries to assist you better?

1. Was there any power outage before you started facing this issue?

2. On your switch while it's plugged into the outlet, do you see any lights on? (Amber or green) Please let us know which lights are on. (Please refer to the below picture and share a picture of the same showing the light status and the cable connections to the Switch)

3. May I know how many Access Points are connected to the Switch? Could you please let me know the light status on the Access Points? Any of these lights are on (Please refer to the below picture and share a picture of the same)

Please help us with pictures of your ICX-7150-C12P Switch showing the status of the lights. Also, light the status of Access Points.

Before uploading the photos please log in to the RUCKUS account and you can upload the image.

Please let us know the answers to ALL the above queries or if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

aelfert

There were no power outages. I was home working in WiFi when it stopped working.

There are no lights on the switch.

I have three access points. All of them have no lights. 20230601_160532 (1).jpg

imran.sanadi@commscope.com

Hi @aelfert

Greetings!!!

Thank you for the response and the detailed information you shared.

As you mentioned that you have tried with different power cords.

Also, please try to reset the Switch as described below:

1. Please try to disconnect from the Power outlet the ICX-7150 and reconnect.

2. Please try to press the reset button using a paper click or a small stick

Remove power from the switch.
Press and hold the Reset button while applying power to the switch.
After all the system LEDs flash amber, release the Reset button.

Below is the Guide and Videos link for your reference:

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-D3B5DB74-53A7-4F8D-82F9-6EB600879EE7.html

Video link: https://www.youtube.com/watch?v=6jHMTdo_hK4

IF RESET IS NOT WORKING, PLEASE TRY TO RESET YOUR SWITCH MULTIPLE TIMES AS DESCRIBED ABOVE.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

aelfert

I attempted to reset the device following the instructions four times without success. I get a short flash of amber lights and then no lights after that.

imran.sanadi@commscope.com

Hi @aelfert

Greetings!!!

Thank you for the response and the information you shared.

Could you please plug your ICX-7150-C12P Switch into a working power outlet and send us a PICTURE and VIDEO of it showing the light status, and cord connected to the Switch and a working power outlet? Please refer to the below picture as an example.

Please use the below link to upload a VIDEO:

https://drive.google.com/drive/folders/16lG-j0MSKzjqBJSY4rsgh4myUlseA9bz?usp=sharing

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

aelfert

The requested photos are provided. I took a video but it says I don't have permissions to the google drive. Here is a link to the video, I hope that works https://photos.app.goo.gl/DeBZPASzNNQeQFzdA. 20230602_135753 (1).jpg 20230602_135744 (1).jpg

imran.sanadi@commscope.com

Hi @aelfert

Thank you for sharing the requested information with pictures and a video.

Feel free to contact us via chat, comment you already have a post, copy the link from the post (URL) and paste it into the chat to start the unit replacement.

Please follow the below steps as shown in the below example:

As shown in the below picture, copy the link and share it via chat from the link provided below:

The below link is to contact us by chat (only)

https://support.ruckuswireless.com/contact-us

NOTE: Please feel free to mark the post as ACCEPTED SOLUTIONS.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Have a great weekend ahead.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.