PoE has recently went offline on my Ruckus 7150 switch. When I connect to the console I see the following error messages:
> Vmain (48V) fault has forced all ports on slot 0 to lose power.
I've attempted to upgrade the image to version 8095g over TFTP as advised in https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/POE-Fatal-message-is-flooding-console-on-ICS7150-c12-switch/m-p/51365
When I enter the upgrade command, I get the following error:
--------------
copy tftp flash 192.168.0.9 SPS08095gufi.bin bootrom
telnet@ruckus-switch#The code type 64 is not correct for the target hardware, abort!
File Type Check Failed
--------------
Version:
--------------
telnet@ruckus-switch#show version
Copyright (c) 1996-2017 Brocade Communications Systems, Inc. All rights reserved.
UNIT 1: compiled on Aug 14 2017 at 06:54:44 labeled as SPS08061a
(24723488 bytes) from Primary SPS08061a.bin
SW: Version 08.0.61aT211
Compressed Boot-Monitor Image size = 786944, Version:10.1.10T225 (mnz10110)
Compiled on Sun Jun 25 09:25:15 2017
HW: Stackable ICX7150-C12-POE
-------------
Tried upgrading to 08070c and 08070aa, similar message, but the code is 33 instead.
Tried upgrading to 08080f first, as advised in the link. Tried all 4 images, received the following errors:
-------
telnet@ruckus-switch#copy tftp flash 192.168.0.9 SPS08080f.bin bootrom
telnet@ruckus-switch#The code type 33 is not correct for the target hardware, ab ort!
File Type Check Failed
TFTP to Flash Error - code 8
telnet@ruckus-switch#copy tftp flash 192.168.0.9 SPS08080fufi.bin bootrom
telnet@ruckus-switch#The code type 64 is not correct for the target hardware, ab ort!
File Type Check Failed
TFTP to Flash Error - code 8
telnet@ruckus-switch#copy tftp flash 192.168.0.9 SPR08080fufi.bin bootrom
telnet@ruckus-switch#The code type 64 is not correct for the target hardware, ab ort!
File Type Check Failed
TFTP to Flash Error - code 8
telnet@ruckus-switch#copy tftp flash 192.168.0.9 SPR08080f.bin bootrom
telnet@ruckus-switch#The code type 33 is not correct for the target hardware, ab ort!
File Type Check Failed
TFTP to Flash Error - code 8
------
Please advise.
