dataspeed

sander_van_veg1

Hello,
We use the Virtual Smartzone and have a VLAN 10 with a limited data rate. Where can I adjust this interspeed for this VLAN 10?

sanjay_kumar

Hi @sander_van_veg1 
When creating the SSID, you will have 2 options for setting the Rate limit.
1. Rate Limit Per SSID.
2. Rate Limit per User (UTP profile)

To configure the Rate Limit per SSID : under SSID >> Advanced Options >> SSID Rate Limiting
You can se the Rate limit for Uplink and Downlink.

To configure Rate Limit per User : under SSID >> Firewall Options >> Firewall Profile >> Click on Create >> Set the Uplink and Downlink.

I hope this should help your requirement.
Note : Rate limiting in user traffic profile will not work if SSID rate limiting is enabled.