nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

T series/ R700 reboot PoE switch will can't boot up

unknown

Any person has similar experience?
I am using Cisco switch with T300 series AP and R700 AP with SCG
Recently some of the AP will can't boot up after reboot the PoE switch
Some of them will return to original firmware from ZD
Some of them will return to original firmware from SCG

Find more posts tagged with

Accepted answers

All comments

unknown

I am using Cisco switches with no issue, same combination of R700 and T300. I also deployed with T301s. What switch model are you using?

unknown

WS-C2960XR-24PD-I

unknown

Sounds like the units are defaulting back to the backup image on the ap. This can occur if an update is corrupt. We use a zd and SG300 switches with no issue. Can you log into the apartment and download the log. A ruckus technical person can review it and find out the error occurring.

unknown

After checking it seems that the CLI script make the AP can't boot up and I open another post for it
Actually the code should not make it happened but we can reproduce it.

michael_brado

Please provide your AP firmware version and switch model/firmware version to Tech Support,
as we'd like to see a reproduceable issue too.

unknown

The cost found is cli script problem and the cli script already upload on another post

unknown

fw_version=3.0.4.0.461

model=all

set blacklist wifi1 52 -1

set blacklist wifi1 56 -1

set blacklist wifi1 60 -1

set blacklist wifi1 64 -1

set blacklist wifi1 100 -1

set blacklist wifi1 104 -1

set blacklist wifi1 108 -1

set blacklist wifi1 112 -1

set blacklist wifi1 116 -1

set blacklist wifi1 120 -1

set blacklist wifi1 124 -1

set blacklist wifi1 128 -1

set blacklist wifi1 132 -1

set blacklist wifi1 136 -1

file b

fw_version=3.0.4.0.461

model=all

set blacklist wifi0 2 -1

set blacklist wifi0 3 -1

set blacklist wifi0 4 -1

set blacklist wifi0 5 -1

set blacklist wifi0 7 -1

set blacklist wifi0 8 -1

set blacklist wifi0 9 -1

set blacklist wifi0 10 -1

set blacklist wifi0 12 -1

set blacklist wifi0 13 -1

unknown

Enter admin for the user name and password for the password. If you changed your admin password, enter the password that you created. NETGEAR genie displays.
see: https://luckypatcher.pro/
https://kodi.software/
https://plex.software/