I have 10 AP of R510 unleashed network, can I add M510 AP to this network? will it be compatible?
R510 APs are running system version 200.7.10.2.339 as well as M510
Hi @soulcage57 M510 and R510 are compatible in 200.7.10.2.339. You should be able to add the M510 APs.
Hi @soulcage57
For future reference you can always look into the upgrade guide or the release note of any specific code and the listed supported model APs will always be compatible with each other (for a mix model network).
https://support.ruckuswireless.com/products/82-unleashed-and-multi-site-manager?open=document#sort=relevancy&f:@source=[Documentation]&f:@commonproducts=[Unleashed]
Best Regards
Vineet
Hope you are doing well !
The M510 device has some limitations, please refer to the following image:
Link: https://support.ruckuswireless.com/documents/4320-ruckus-unleashed-200-13-user-guide
Fernando Vasquez
Hi @soulcage57 Below is the guide or the version 200.7.10.2.339https://support.ruckuswireless.com/documents/2599-ruckus-unleashed-200-7-ga-user-guide/download
The limitations and deployment considerations are still the same as below, but please go through it once before adding the M510 APs with R510 network.
Thanks for the answer
As I understand I can't add M510 as a member AP to R510 network
That's correct !!
