No PoE from ICX-7150 to AP

carlos_messe

My name is Carlos. I have a Lennar smart home and the equipment shown above earlier in this post. XFinity is my ISP and I just replaced the modem/router with a newer model.  Upon doing so, my ICX-7150 is no longer providing PoE to the AP. The ICX-750 is connected directly from the modem and then two ethernet cables run to the AP and a Ring doorbell. These are not recieving power. The cable from the modem shows green, but not flashing amber. I'm trying to restore PoE and I've switche cables and tried all of the 12x ports on the ICX-750. Thank you.

Carlos

imran.sanadi@commscope.com

Hi @carlos_messe

Greetings!!!

Thank you for contacting Lennar Home Community.

Hope you are doing well!!!

As per the case description, I could understand that your Access Points are not getting power from ICX-7150-C12P Switch.

 

As you mentioned that  your modem is directly connected to the ICX-7150-C12P Switch, it doesn’t work only with Modem. The connection must be from a Router or Modem-Router combo device. Could you please confirm this once?

 

Please refer to the short guide link below about how to connect the devices as a reference:

Most common Setups for Lennar homes users:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lennar-homes-users/td-p/47106

Please let me know if you have any queries in this regard.

Thank you again.

 

Best regards,

Imran Sanadi

Lennar Home Community.