WPA3 & DPSK

richardcorso

I have a set up of R750 running in unleashed mode on software 200.13.6.1.319.

But the moment i enable WPA3, the DPSK tab vanishes.

However, 6E APs R560 & R760 have been marketed with WPA3 & DPSK support:

Adds the power of DPSK to WPA3/SAE combining enhanced security with the flexibility and ease of use of dynamic passphrase to secure network access.

https://www.commscope.com/product-type/enterprise-networking/wireless-access-points/indoor/r560/

RUCKUS Networks is also adding support for the WPA3 security framework to RUCKUS Dynamic PSKTM (DPSK) technology, combining ease of deployment with advanced user security and control.

https://www.businesswire.com/news/home/20230119005140/en/RUCKUS-Networks-Enables-Multi-Dwelling-Units-to-Access-New-6-GHz-Spectrum-Enhancing-Advanced-Wi-Fi-Services

Will the support extend to older AP model R750 as well, which does not have a 6GHz radio?

Will it be available in the unleashed variants or i need to invest in new management platform?

Thanks in advance.

 

Ayush_Tripathi

Hello @richardcorso 

In unleashed 200.13 firmware version WPA3+DPSK is not supported.

R760 and R560 are the new model APs and as of now there is no any unleashed firmware version for these APs.

Also checked in the new SmartZone firmware version 6.1.1 and 6.1.0.9204 and it is also not supported WPA3 with DPSK.

We will check and let you know in which release this feature is supported.