nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

ZoneDirector 1200 (EOL) Support Requested

bethschi

Good morning -

The farm next door to me had a grant from Microsoft 3+ years ago and the individual installed ZoneDirector 1200 along with 15+ APs. The individual who installed has ghosted. Recently a power surge has what i assume has cooked the zone director. Our wired network fine, but can't connect to any wireless SSID. Red light is always flashing despite trying reset and then trying to put back to factory defaults. Replacement on way, but need to someone with expertise to consult on install of new one. Please contact me directly at 518-409-3535. The Farmers, essexfarmcsa.com, are lost without their WiFi as cellular coverage is weak at best in our area. Can provide remote access to the network and a schematic of network.

Thanks in advance.

Find more posts tagged with

Accepted answers

All comments

bdillard

Do you happen to know what model APs you have? Do you know how long it will be before the new ZD arrives?

bethschi

predominately R500

bethschi

expect replacement zone director 1200 Monday

bdillard

Thanks - most of my clients are financial so they can't have any downtime. So I'm looking at it from that point of view. The red light probably means it is looking for info from ZD.

You have a few choices - if you want it up right away you could reset it to just unleashed. Unleashed works fine - ZD let's you do some additional detailed analysis but if your goal is just to just wifi and maybe have a few SSIDs, you can use unleashed without the zone director. This you could do yourself for free in all probability.

You could wait for the Zone Director if you need that additional tracking info but for most clients it doesn't offer much unless they have a LOT of APs in a campus like environment or they need to gather a lot of information on the APs.

This is just my opinion of course. Best of luck. Glad you don't have a long delay for the new ZD if you decide to go that route.

bethschi

thank you for your responses.

I am a bit confused and perhaps my lack of knowledge of the functionality of the zone director in the network is part of the issue. Two weeks ago, power surge. Zone Director 1200 has flashing red light. Unable to reset or use the process to set back to factory defaults. Assume it had power surge hit and no longer functioning.

Is it safe for me to assume that without Zone Director in a network of 15 ruckus R500 APs that one could no longer connect to the network? SSID is out there, but devices can't connect. Assuming I am barking up the correct tree, with a used replacement coming, if I set up the basic i/p information per my diagram, will it automatically figure out what to do and then allow devices to connect?

bdillard

I forgot to mention, when you get the new ZD, don't replace the whole unit. Try just switching out the power supply. It might be that the power adapter got fried.

bethschi

Received my new zone director and I think this one is DOA. Again, have tried to reset to factory defaults and can't seem to get it to talk on 192.168.0.2 ... no ping, no nothing.... so I may be interested in learning more about unleashing. I think you indicated that I would only need to do this on one of the many AP's. I need to physically reach an AP correct? Would like more info on how to do this as the poor farmers wish to get on with having internet.

bdillard

OK. DId you try just switching the power supply with the old one first leaving the old one in place? Do you have a firewall? When you connect your computer directly to the internet if you have windows click on start, type CMD - open it. In the black box - type ipconfig. Verify what your IPV4 address is.

bethschi

Since this "new" used zone director does not seem to wish to reset either, I would like to move ahead with unleashing all the AP's. You mentioned that as long as I can physically get to one of them, this is possible to do? when can I set up a computer on their network, provide you with remote access and unleash all of the APs. I can also send a schematic of network. Thank you in advance. would like to get them back working again befoe end of the week.