nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

RMA STATUS FOR DEAD SWITCH

Altakocker

I reported a dead ICX7150-C12P switch last week. I gave all the information using your chat tool. I was never issued an RMA number but was advised the switch would be replaced. I have checked your web site and due date and ticket was closed today. 01/03/2023. Are you sending me a replace switch? I did not receive an RMA number. Can you tell me the status of replacement?

Thanks

Find more posts tagged with

Accepted answers

All comments

Altakocker

Hello,

I have a ICX 7150-C12P that has no lights and no plugged in ports have lights on them and will not communicate. I have tried plugging the unit into different ac outlets and a different power cord.

The unit is totally dead.

Can you help me getting the unit replaced? I live in a Lennar community.

Thank You

Yarenis

Hi @Altakocker

Thank you for the detail provided, please share a picture while the ICX7150 is connected directly to the power outlet, and showing there are no lights.

Best regards,

Yarenis Hernández.

Technical Support Engineer | L2 TAC Wired | Lennar Home Community

nigelcov

How can I drag a picture here?

nigelcov

I have the same problem

Yarenis

Please open a new post for your issue, and will be matter to copy and paste or use the insert photos tap.

Best regards,

Yarenis Hernández.

Technical Support Engineer | L2 TAC Wired | Lennar Home Community

Altakocker

I have sent a picture. Let me know what steps are next in obtaining a replacement icx 7150-12P

Yarenis

Hi @Altakocker

Thank you for the details provided, based on the troubleshooting you have done since the ICX7150 Switch is not linger powering even in directly wire to the power outlet, this unit must be RMA (return merchandise authorization), which means to replace it, please contact us via chat, comment that you already have a post that we have approved the RMA for you, copy the link from this post and paste it into the chat to initiate the unit replacement.

Link for the Chat

https://support.ruckuswireless.com/contact-us

Note: Please feel free to mark the post as ACCEPTED SOLUTIONS

Best regards,

Yarenis Hernández.

Technical Support Engineer | L2 TAC Wired | Lennar Home Community

Yarenis

Hi @Altakocker

Reach us via chat with the link I have shared.

Best regards,

Yarenis Hernández.

Technical Support Engineer | L2 TAC Wired | Lennar Home Community

Yarenis

Altakocker

I think I have found the case#01420912, I was able to contact the coworker who help you on the chat, unfortunately you did not share the post where we approve the RMA which is part is the process, please open a new chat, and check my next example.

Example:

Hi, I am requesting an RMA for the unit<Serial of the Switch>, I got approved in the community forum, let me add the approval post:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/RMA-STATUS-FOR-DEAD-SWITCH/td-p/51257/page/3

Best regards,

Yarenis Hernández.

Technical Support Engineer | L2 TAC Wired | Lennar Home Community

Altakocker

The case # is/was 01420912. It was my understanding (after using chat tool) that the switch was going to be replaced. I have attached info.

Keep me posted on status of replacement switch.

Thank You

Yarenis

Altakocker

Yes, that was the issue, must be link they will check the interaction, please open a new chat now, and you may get the device tomorrow.

Best regards,

Yarenis Hernández.

Technical Support Engineer | L2 TAC Wired | Lennar Home Community

Altakocker

I have been unable to get assistance in getting a defective switch replaced. Tickets keep getting closed with no explanation and nobody is willing to help a Lennar home customer.

As a Lennar homeowner with Ruckus equipment in my home, I fully recognize what the saying Lennar homeowners have means. "WHAT RHYMES WITH RUCKUS" Hint "It starts with an F"

Vásquez_Fer

Hi @Altakocker

Please open a new chat and explain the situation in datil , that you already have a post with the proper approval , they should track your query.

Best Regards

Fernando Vasquez

Altakocker

I have an ongoing problem with a ICX7150-C12P. There are no lights on unit and all ports are not working. This is my second attempt in trying to gat a replacement for it.

Vásquez_Fer

Hi @Altakocker

Hope you are doing well!

+Emerging to previous post

Based on the troubleshooting done, and you confirm no power on, on the unit and is totally dead (no lights at all, this unit Should be RMA (return merchandise authorization) in simple words replace it.

Feel free to contact us via chat, comment you already have a post, copy the link from the post (URL) and paste it into the chat to start unit replacement.

The below link is to contact us by chat (only)

https://support.ruckuswireless.com/contact-us

Best Regards

Fernando Vasquez