nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Diferents Firmware in my vSZ

javier_leal_lil

Hi!

I have installed a new vSZ with 5.2.2 firmware version. I want to adopt in it several old APs with other firmware version, for example 3.6.2. How can I upload to my vSZ this firmware to change one or more AP Zones to adopt these APs?

Thanks!

Find more posts tagged with

Accepted answers

jorge_ruizdeegu

Hi Javier,

You need to upload the SmartZone AP Patch. You can find it in the SmartZone Download tab in the Support Portal:

You can also use this direct link:

https://support.ruckuswireless.com/software/3068

Then, you need to upload the .patch file in the "Administration"/"Upgrade"/"AP Patch" section:

Let me please know any issue you may find on the process.

Thanks,

Jorge

All comments

jorge_ruizdeegu

Hi Javier,

You need to upload the SmartZone AP Patch. You can find it in the SmartZone Download tab in the Support Portal:

You can also use this direct link:

https://support.ruckuswireless.com/software/3068

Then, you need to upload the .patch file in the "Administration"/"Upgrade"/"AP Patch" section:

Let me please know any issue you may find on the process.

Thanks,

Jorge

javier_leal_lil

Thanks very much Jorge.

I have installed the new patch to allow old devices but I dont find the way to put a one ap zone the firmware 3.6.2 for example. It only allow me put 5.1.2 (initial firmware installation vsz) and 5.2.2.

Thanks!

javier_leal_lil

Thanks very much Jorge. This resolved my problem! Regards

bruno_andrade

Hi Javier, you must create a new zone and during the creation, it will allow you to choose the 3.6.2 firmware.