nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Unleashed management vLan

nir_lazar

Hallo All,

I'm managing 9 vlans environment. each vlan represents wLan and all works like a charm.

only issue is when i'm trying to access IT wLan on a management vLan (management vLan lists all network appliances e.i. AP’s, Firewall, switches Etc), i cant get a DHCP lease. and i know why. its because i gave the master AP an IP address (on the management segment vLan) on the default unleashed vLan.

on all switches i could change management vLan and on unleashed i cant find how to change the management vLan.

when i'm trying to change the management vLan i get a message i cant change the IP address for its the same subnet as defined on the master’s IP add.

please help.

Nir

Find more posts tagged with

Accepted answers

syamantakomer

Hello All,

Management VLAN support was added to 200.13 version.

Please refer the 200.13 what's new guide

All comments

Squozen

You don’t need to set the VLAN on the AP - just set the native VLAN for the trunk on the switch end to the management VLAN.

nir_lazar

this is how i did it for all the AP’s (not just the master).

nir_lazar

Untagged on the management vLan and Tagged on all other vLans

Squozen

Ok, then I’m not quite sure what you’re asking to do. Sounds like it’s not the VLAN you’re trying to change but an IP?

nir_lazar

lets say i want to set the management vLan on any other manageable switch, changing the management vLan so i could manage the switch on the designated vLan, im giving an IP address on the management segment. when i connect to a port on the management vLan ill receive an IP address to the management vLan so i could manage the switch on the management segment.

same thing i want to do on the unleashed Master AP. manage it on the management vLan. and not on its default vLan.

as explained, i have access to all wlans on their vLans. just not the management wlan and vLan. i cant get IP add.

syamantakomer

Hello All,

Management VLAN support was added to 200.13 version.

Please refer the 200.13 what's new guide