nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Unleashed issue

Tech

Hello, I am trying to join an AP R610 and R650 in unleashed mode, but for some reason, the second access point (not the master) always appears as disconnected, I try to ping between them and it is not successful, both are in the same network, there are no firewalls or anything that is blocking the traffic, I am using my PC when I ping both is satisfactory, has anyone had this problem?

Note: the access points have the latest firmware and I did a factory reset on both

Find more posts tagged with

Accepted answers

Tech

Thanks for your help, I fixed it, there was some problem in the CAM table on the switch (MAC - Layer2), and now both APs are working. 👍

All comments

Squozen

IP conflict with another device on the network? That’s all I can think of. Maybe your PC is actually pinging something else when you’re testing.

Tech

Thanks for your help, I fixed it, there was some problem in the CAM table on the switch (MAC - Layer2), and now both APs are working. 👍

supportpune

Hi,

R550_200.15.6.12.304.bl7 same firmware update but not master ap added the device

plz help for me added the device