ZF7982 Change Manage controller to Standalone AP

Radhika

Dear Team,

Please provide the solution how to change ZF 7982 Managed controller to Standalone AP for personal use.

current Software 

Software Version: 10.1.1.0.26

Please provide the solution and links of software version. 

while upgrading the firmware error

 

 

Upgrade/Downgrade from FSI to UI is not allowed.

 

 

Vineet_nejwala

Hi @Radhika 

1) Perform a f/d on this AP by CLI or physical reset button.

rkscli: set factory

or

On the AP back console using paper clip, press hold the button which says "Hard Reset" within a tiny circular port for about 10 to 12 seconds.

 

 

2) Download this bundled image and extract 104 image for ZF7982

https://support.ruckuswireless.com/software/1017-zoneflex-solo-access-point-104-0-0-0-1347-ga-software-release

 

3) Upgrade using CLI or WEB :

https://support.ruckuswireless.com/articles/000001551

https://support.ruckuswireless.com/articles/000001179

If the issue persist share below output from AP CLI :

fw show
fw show all
get version

Best Regards

Vineet