nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Ruckus R500 not converting to cloud

johan_castro_a

I have a couple of R500 that are not going to the cloud. I removed them from my ZD, factory reset them, added serial numbers into the cloud portal, software version is the solo 110.0.0.0.2005. I have waited 24 hours and the APs have not contacted the cloud. Rebooted from then web interface, disabled and re-enabled the port on the switch. Still nothing. Any help would be appreciated.

Thanks.

Find more posts tagged with

Accepted answers

johan_castro_a

Thank you! we issued a new AP certificate and that fixed it.

All comments

DarrelRhodes

Hi Johan,

Have you tried a factory reset after you uploaded the 110.0.0.0.2005 software on to them?

You should be able to raise a ticket with Ruckus Support to get this looked at, as the Ruckus Cloud license includes Watchdog end-user support.

Hope that helps,
Darrel.

johan_castro_a

Thank you! we issued a new AP certificate and that fixed it.

DarrelRhodes

Fantastic! I did suspect it might be a certificate issue, if it wasn't the above.