Ruckus AP command not recognized

Question

Hi Guys,

I am trying to connect a brand new Ruckus R500 v 100.0.0.0.127 to a virtual smartzone. however, the AP cannot join the vSZ, nothing in the vSZ's Event tab.
when I try the command 'set scg ip x.x.x.x' on the AP CLI, it returns 'command not recognized'. I tried with 'set director ip x.x.x.x' but the AP is still enable to join the vSZ.

- Does anybody knows why I have the message 'command not recognized'
- How can I troubelshoot this type of connectivity issues, I did not found anything on the vSZ's Event tab and I did not found the logs on the AP side.

Many thanks for your help

unknown · Answer

pls confirm software version on the R600 AP. I believe you got the incorrect software version...

peter_arnett · Answer

Hello, this doesn't appear to work with my R600. I have ensured discovery-agent is enabled and set the director ip to my v-smartzone that sits in AWS cloud but unable to find it. Other ap's that i configure with set scg ip x.x.x.x find the controller no problem.
any help would be amazing.
thanks

unknown · Answer

If AP is running on 100.x version, you should first give the "get 
director ip " command so that AP will upgrade its firmware to vSZ's and 
then give the set scg ip  command which will make the AP to join the 
vSZ.

This incorrect.

You only need to issue:set director ip X.X.X.X