BACK TO SUPPORT PORTAL
RUCKUS Technologies
Wired
Wireless
Cloud Services
Miscellaneous
RUCKUS Lennar Support
Lennar Knowledge Base
RUCKUS Lennar Support
Resources
Community
Technical
Register
RUCKUS Technologies
Home
Resources
Community and Online Support Services
Installing outdoor AP in extreme weather (Alaska)
unknown
Hello Ruckus folks!
i just got a job to install outdoor APs in Alaska. I am just wondering which model would be the best bet to stand up in such extreme cold weather. And any working experience in extreme weather is very much appreciate!
Thank you
Find more posts tagged with
Accepted answers
All comments
michael_brado
Hello Tary,
You can consider the solid zf7782 outdoor AP, IP-67 rated at -40 deg C to +65 deg C
or the new 802.11ac T300 AP, rated at -20 deg C to +55 deg C, will operate at -40 deg C
but will not cold start at -40 deg C.
unknown
Thanks Michael!
I think my concern is... what if temperature below -40C.? One thing i like about Ruckus AP is that built-in with a heater. Again, i am not sure how well it handle extremely cold weather like Alaska. My client is pretty close up to the north of Alaska.
i wonder if anyone deploy Ruckus in such cold weather. May be i will be the first one to make this into a case study.
unknown
Tary, I would highly suggest the 7782 over the T300 for extreme conditions. The 7782 can be connected directly to an AC power source while the T300 is PoE only and does not have the same operating specifications as the 7782. We operate both and after the harsh winter in NY, (Alaska was warmer than NY at times) the 7782's held up with no issues. And if they do freeze, they should restart when the temperature rises.
The T300 does not have a heater.
unknown
Thank you gentlemen!
Actually my client does not need 802.11ac. I know 7763 also has builtin heater. I wonder if 7763 has the same robust capability as 7782. Also do i need to use AC power in order to have the AP to turn on the heater? Or PoE injector is power enough?
unknown
I prefer the 7782 over the 7762. It is more robust and up to date. If you are using the heater and in extreme conditions, I recommend connecting the AC. The PoE injector just adds another source of failure. Most PoE injectors are not manufactured for extreme conditions as you are describing. We have several 7782's deployed connecting directly to the AC on poles and they have been reliable.
Quick Links
🗂️ All Categories
📄 Recent Posts
❓ Unanswered
🆘 Help
Tags
SmartZone or vSZ
RUCKUS Self-Help
Cloudpath
ICX
AP Management
vSZ
Access points
ICX Switch Management
Lennar homes
SmartZone