nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Setting up Ruckus and at&t gateway together with same SSID

sanjiva_srivast

I have a Lennar home with Ruckus r510 and ICX 7150 C12P. I am using it's SSID for all my wi-fi needs. I have internet through at&t and the gateway is also broadcasting a wi-fi SSID that is different than the Ruckus AP. Can I turn the wi-fi off on my gateway? Is this the correct configuration? I want the at&t gateway to have the same SSID so I can get extended coverage...how do I set it up? Does my at&t gateway need to be the primary wi-fi and Ruckus be the bridge? or vice-versa? Also, when the Amazon guy activated the smart home he did not leave any user name and password to get into the Ruckus admin settings. I can get to the unleashed login page but the default user name super/sp-admin does not work. Please help!!!

Find more posts tagged with

Accepted answers

All comments

unknown

Password & Usernames:
I would contact AMZN or the builder, let them know the tech neglected to give you the admin/pass for the system
ATT Router:
I recommend turning off the ATT Router's Wi-Fi, or only broadcasting a simple management WI-Fi should you need to jump in and do some administration. Power level control, intelligence, interference mitigation, and roaming cohesiveness is something the ATT unit will not participate in.

unknown

I had a similair issue with access to Ruckus unleashed and Lennar shared that the username was admin and the password was Ruckus! Obviously you should change them once you log in
Image_ images_messages_5f91c45c135b77e247a46699_d3f843fdc54db24a62147bbb487dd636_RackMultipart202006046318515s6-885e7e9d-04d7-458d-98d9-9deef8a3edb5-647021760.jpg1591282794

Image_ images_messages_5f91c45c135b77e247a46699_d3f843fdc54db24a62147bbb487dd636_RackMultipart202006046318515s6-885e7e9d-04d7-458d-98d9-9deef8a3edb5-647021760.jpg1591282794

unknown

Tom, you are RAD!

sanjiva_srivast

Thank you both! The user and password combination does not work for me. I have contacted the builder and awaiting reply.

sanjiva_srivast

Phew! Finally figured it out.... the user name was admin and password was same as my wifi password!

sanjiva_srivast

Is there any way to add a. 3rd party wifi router as an extender to the Ruckus R510 AP? I looked everywhere in the settings but could not find any place to do so. Appreciate your quick responses. Also, my at7t is a 1 Gbps connection but I don't see speeds more than 250 mpbs even when I am under the R510 AP. Any suggestions?

unknown

you should not add a 3rd party accesspoint.
use a ruckus accesspoint to extend your range.
you ca also take a R320

sanjiva_srivast

Awesome! Thanks.

unknown

hi, I have setup my rukus wireless but internet is not working on that router via at&t. Whats steps/setup are required on at&t router in order to use rukus as my router?

sanjay_kumar

Hi Ravindra,

Login the AP and ensure that the AP has internet. (which should be getting from the at&t device)
You can verify it under Dashboard >> Internet >> You should see that there should be an IP under DNS and the "Internet" should show as "Connected".

If the Internet is not connected, then ensure the AP should be getting the IP address from at&t (which I believe is the gateway for your network and serving as DHCP server).

sergiosoto78

What do you mean the same as your WiFi password?

unknown

Just FYI for anyone coming through here later, sometimes Lennar sets up the password to be "Lennar" (no quotes).

unknown

Admin

lennar is the password

unknown

I have the worst Lennar customer service experience. They send the electrician and did the factory reset procedure. After noticed that the Ruckus WIFI is no listed on the PC, he said I don't know how to work with the network.

What now?

unknown

You have to set up ruckus again download the ruckus unleashed app then start on the typical or gateway install doesn’t lennar homes have Amazon services come out and do your setup and add all your devices to the ruckus

unknown

Lennar send an electrician and did the factory reset procedure. Lennar doesn't have network service. After that I don't see the configure.mexxxx in the Wifi list. So I can not access the switch condition. I try to get in they the IP but seems to be protected and I don't have neither user not.password

unknown

I did the reset on the PoE and on the switch icx 7150. Still not seeing the configure.mexxxx. Any other suggestion?

unknown

Is the att router going into one of the center 8 inputs if so then you may not have to reconfigure and just click on manage network admin and the Lennar password the update rukus and see if that works

unknown

I have read through all the above post and feel that the original question is still not answered.

My Set Up:

I have ATT Fiber internet with a BG210-700 Modem. This is broadcasting SSID (for the sake of discussion 'UncleATT76')

There is a single cable going into a Ruckus ICX -C12P. This connects to 2 Ruckus APs Zoneflex 510 Unleashed, which in turn broadcast SSID (for the sake of discussion 'UncleRuck76' )

The ICX wires a wall outlet in my basement which in turn connects to an ATT extender 'Air 4921'which in turn broadcast SSID (for the sake of discussion 'UncleAir76' )

The ICX wires another isolated section of my house which I have connected to an old Netgear NightHawk R7000 Router which in turn broadcasts SSID (for the sake of discussion 'UncleGear76' )

So my questions is;

Is there a way to sync up all SSIDs and broadcast as the same network.
1. This will help when i change location so the connected devices can change APs quickly
I have 1GB coming in on a connected line (and yes I do get speedtests results of ~950 MBPS) but on any APs i get about 290 downloads on an average.

Please help me in detail if you can for all my above questions.

regards

sergiosoto78

@bhavin_mehta

I would not name the access points the same as the AT&T Wi-Fi just give them their own unique SSID name and if you ever move in the future rename Your new network with the same SSID so that all your devices can quickly and easily connect without having to reconnect each one. Just remember to reset your access points when you move. The access points are limited to a certain speed that is going to be different from your hard wired and from your incoming speed.

sergiosoto78

I also forgot to mention that the devices are going to connect to the access point that is closest or that has the strongest signal and your system should spread the load out. I have 23 wireless devices. 12 connected to AP1 and 11 to AP2. I have the same ATT plan but I just deactivated the wireless radio on the ATT modem/router

unknown

@sergiosoto78

Thank you for the response.

@Ruckus - Is there a way I can get some more guidance from Ruckus tech support.

I forgot to mention that all the SSID broadcasting devices as mentioned above are quite well distributed in different locations of the large house leaving no dead zones.

I have been able to log on to netgear device and have set it up on an extender/access point, so it doesn't serve as a modem.

How do network engineers set up access points in offices? So when one moves from meeting room to meeting room, they don't have to reset the wifi connections?

I saw some YouTube videos on passthroughs and disabling firewalls, but since i am not an expert, I haven't attempted that.

4 different SSID in a Lennar Smart Home with oversmart devices is a pain.

This did not work! We are currently having the same issue as the author of this post.