nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

RUCKUS Technologies
RUCKUS Lennar Support
- Lennar Knowledge Base
- RUCKUS Lennar Support
Resources
- Community
- Technical
Register
RUCKUS Technologies

M510 and Zone configuration (SmartZone)

harald_thomas_c

If you try to move an M510 to a Zone with a non-tunnel or non-dhcp/nat SSIDin a WG, you will end up with the error message, that this is not possible (no-tunnel, no-dhcp/nat).
The move is only possible if every SSID is configured with tunnel or dhcp/nat.

Would be nice to be able to move the M510 if there is one SSID with tunnel or DHCP/NAT.

Find more posts tagged with

Accepted answers

All comments

There are no accepted answers yet

Quick Links

🗂️ All Categories
📄 Recent Posts
❓ Unanswered
🆘 Help