nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Migrating from ZD1100 to ZD1200 with a few new AP's

jeremy_reed_656

I currently have a wireless network with a ZD1100 and (12) ZF7982 AP's. Im looking to swap out the ZD1100 and put a ZD1200 in it's place. In addition, I need to replace one of my ZF7982 AP's with an R710.

I understand that I need to get the ZD1100 and ZD1200 on the same firmware version which will be 9.10.2.0.29. Then I can migrate my config. HOwever, what do I need to do with the R710? It is running 104.0.0.0.1347. im not familiar with this version. Do I need to do anything with the R710 firmware?

Find more posts tagged with

Accepted answers

All comments

michael_brado

The 104 (Solo/Standalone) code will connect to either ZD or SZ controllers.
Upgrade/Migrate to your ZD1200 before connecting the R710, might be easiest.

jeremy_reed_656

OK great. It is ok if the R710 is running a different firmware version than the controller/rest of my AP's?

jeremy_reed_656

OK great. It is ok if the R710 is running a different firmware version than the controller/rest of my AP's?

unknown

yes, the R710 will get the firmware from the ZD as soon it connects to it. (followed by restarts)

jeremy_reed_656

Ok, thank you for the help!