vSZ 5.2.0.0.669 and clients in default vlan when passing vlan from Radius

Question

Is anyone else seeing clients intermitently being put into the default vlan on an SSID that using Dynamic VLAN's supplied from Radius?

I've had a couple of reports of this occuring now. The radius logs show it's supplying the correct vlan when the client authenticates. However, possibly when roaming, the client will sometimes drop into the default vlan instead. This is disruptive as it involves an IP change and different security settings.

I'm just about to try reverting the AP firmware back to 5.1 to see if that fixes it as we didn't have this problem on 5.1 (or at least it wasn't reported). Just wondering if anyone else has seen it

pasquale_monar2 · Answer

Please open tac cases so support can get to the bottom of this.

santhosh_dk · Answer

Similar issue reported in 5.2 with reference
to clients getting IP from default valn when Dynamic vlan’s configured. Please
reach out to Ruckus Support for further troubleshooting.
https://support.ruckuswireless.com/contact-us

Regards
Santhosh

unknown · Answer

I upgraded to 5.2 over the summer from 5.1. I'm seeing some clients get put into the default vlan when roaming as well.