How to setup external DHCP server.with Ruckus

Question

This might be the basic Idea and extremely sorry if that was asked earlier. Since I am novice and just starting setting up Ruckus would like to know how do I setup Ruckus with external DHCP server. I have AP7362, ZD 1106

munish_munish · Answer

Hi Blason,

There are two option for the authentication .

Use guest pass authentication: Redirect the user to a page requiring the user

to enter a valid guest pass before allowing access to the guest WLAN See

Working with Guest Passes.

• No authentication: Do not require redirection and guest pass validation.

You can create the L3 interface on the router if you don't have L3 switch.

Hope this helps.

Thanks,

Munish

**** Pls rate all useful responses ****

unknown · Answer

Thanks once again.

And referring to your first topology which is an simple one. Can I implement Guest Access with single network or do I need to incorporate L3 witch and then implement Guest VLAN?

Well eventually I need to implement Guest Access with simple topology that you have shown in first diagram.

munish_munish · Answer

Hi Blason,

If the AP is connected to a remote site , by default it will keep the client traffic on local site . Client will still get the IP address from the local DHCP server . See the diagram