R710 unleashed. How do I increase the 100 WiFi devices limit?

Question

This is the first time I've purchased a Ruckus access point. It's an R710 unleashed. I'm using it Standalone. The Firmware is up to date. Everything is fine apart from the wifi connection seems to be limited to 100 wireless clients even though this model should go much higher (500). If I try to connect more it wont allow me to. The only place in the GUI which I can find to raise the setting from 100 is in the 'Other' tab in the global 'Edit AP's' section. However, changing this number for my model doesn't change the fact that I can only connect 100 devices via WiFi. (I own 115 tablets which I'm using to test). Many thanks

nat_nat · Answer

Regardless of the model of your AP if you have only one AP in an Unleashed network then it can support only 100 clients because Master AP supports up to 100 clients only. If you have second AP then the Unleashed network can support up to 512 clients.

This is specified in https://www.ruckuswireless.com/products/system-management-control/unleashed

under 'Specs' tab.