nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Changing Northbound IP

ali_talha_cevik

Hello,

We are trying to integrate Ruckus SZ controller with our guest wifi system, We need to set NbiIP parameter in redirection url as our public IP instead of local management IP. By default this parameter is local management ip of SZ controller.

Here is redirection URL :

login?nbiIP=192.168.8.97&client_mac=ENCd3c2aef98889a86001b5aa0d66e7f8fc2f95d0f6f7ececba&domain_name=Gebze&reason=Un-Auth-Captive&wlanName=ruckusDevelopment&dn=scg.ruckuswireless.com&ssid=ruckusDevelopment&mac=c8:03:f5:39:01:40&url=https%3A%2F%2Fdeneme.com%2F&proxy=0&vlan=1&wlan=2&sip=scg.ruckuswireless.com&zoneName=sEjfBX2-ihl1grlttAtdqR9iZV8ZyAi_bnfl6wtCxH0_1643096951069&apip=192.168.10.201&sshTunnelStatus=1&uip=ENCb2579826807a64302892e68ff98dd8ab HTTP/1.1

Is it possible to define a custom northbound interface IP ? If not, can we attach the public IP to the URL somehow ?

Thank you.

Find more posts tagged with

Accepted answers

ali_talha_cevik

We figured it out. The solution is : Under System > Cluster, configure control planes, We have set the "Control NAT IP" as the public IP in the Physical interfaces tab.

Then NbiIP parameter becomes the public IP.

Thank you for your attention. @toomas_kadarpik , @parikshith_nagaraj_aa0004

All comments

toomas_kadarpik

SZ system has two installation versions Highscale and Essentials, the latter is with one interface and Highscale uses separate control / management interfaces. NBI interace is JSON API based, this communicates with login script / serverHTTP, wispr profile must have redirect url to this http/https server and the server then connects to the smartzone northbound API, for example tells to the SZ to let mac address in. We have done over 50 integrations with SZ and the latest one was confirmed e-mail version, a customer just confirms e-mail in his or her gmail or another mail and wi-fi works after that.

unknown

Hi @ali_talha_cevik,

By default we present management IP as NBI in redirection URL. However, we do support UDI (User defined interface) to post JSON requests on port 9080/9443. Please refer below documentation for more info on UDI and JSON requests.

https://support.ruckuswireless.com/documents/3647-smartzone-6-0-0-ga-hotspot-wispr-reference-guide-sz100-vsz-e-sz300-vsz-h/download

Regards,

Parikshith

ali_talha_cevik

@parikshith_nagaraj_aa0004 Beyond decryption requests we need it in order to move forward next stages of the login flow. We need to send API login requests to the public IP in front of SZ controller.

ali_talha_cevik

We figured it out. The solution is : Under System > Cluster, configure control planes, We have set the "Control NAT IP" as the public IP in the Physical interfaces tab.

Then NbiIP parameter becomes the public IP.

Thank you for your attention. @toomas_kadarpik , @parikshith_nagaraj_aa0004

unknown

@ali_talha_cevik yes, that is correct. Redirection NBI would be public IP in that case.

Regards,

Parikshith