nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

[808 Cluster application stopped] on vSZ-E 5.0.0.0.675

unknown

We are testing vSZ-E version 5.0.0.0.675 before deploying to customer.
Two errors occured about 3 hours apart.

808 | Cluster application stopped | Critical | Outstanding | Application [NC] on node [TEST-vSZ] stopped.

Is this a known bug in version 5.0 ? I have downloaded the logs, but I can't open a case, since this is only a test deployment without license.

Find more posts tagged with

Accepted answers

All comments

martin_martin

Hi Daniel,
This is known and a cosmetic thing, the application actually did not stop.

As soon as you have your license, let us know and we will provide the patch.
Regards
Martin

unknown

We have these same errors, can you provide a patch?

martin_martin

If you have this, then please open a case with Support and they can provide it to you.

Kind regards
Martin

unknown

I did, this was their response:

These messages you are getting because for a system IO intensive
scenario on SZ, the check process scripts may not be able to respond in
10 seconds, then led to process checking failed. Solution will be to
extend the process check timeout to align with the check alive timeout
(10) minutes.

We have a reported issue for this. And the issue will be fixed in 5.0.5.0.0 670+.

---

No mention of a patch to get us by until this new version.

martin_martin

Please provide your case number and i will contact you.
Regards
Martin

unknown

00818687

unknown

Hi guys, I have the same story. Waiting for patch. Case 00869641. Thanks

martin_martin

Hi Igor, I see the case is closed already as they installed the patch for you.
regards
Martin

unknown

I have this same problem here, to get the patch I will have to open a case?

martin_martin

Correct, or upgrade to 5.1

Kind regards
Martin

unknown

ok, im waiting for Patch.Case ID: 00894926

unknown

I can not upgrade to 5.1 because I use more than one firmware, 3.6 and 5.1, as I have to support older models of APs