Ruckus ZoneFlex 7363 Assign other two Ethernet port as a switch

Question

The Port3 connected to Router with DHCP. Wifi is working fine. How do I configure the other two Ethernet ports as a simple switch that can connect to the router on Port3?I see Trunk Port, Access Port, or General port. just don't know which and the rest of the settings.

unknown · Answer

With the latest firmware update, it seems to resolve the issue. thanks for the kindly replies everyone!

unknown · Answer

Here is a simple topology image attached. Just want to know the correct settings to make the Port 1 and Port 2 act as a simple switch.

syamantakomer · Answer

Hi Rick,By default APs ports works as passthrough ports.One of the ports will connect to uplink switch/router and other ports you can be used as passthrough ports (just like a bridged switch port).Please note that connecting multiple interface of the APs to same switch/router may cause loops so avoid that.If you could share a simple topology which explains what you are trying to achieve will help here. Regards,Syamantak Omer