BACK TO SUPPORT PORTAL
RUCKUS Technologies
Wired
Wireless
Cloud Services
Miscellaneous
RUCKUS Lennar Support
Lennar Knowledge Base
RUCKUS Lennar Support
Resources
Community
Technical
Register
RUCKUS Technologies
Home
RUCKUS Technologies and Products
ZoneDirector
Same SSID at two different locations and different DHCP relay
unknown
I am trying to create the same SSID with multiple VLANs and different DHCP relay. Trying to setup same SSID at two different sites with different firewalls. I would like to have the SSID go to the corresponding DHCP server based on their location. is this possible to do?
Find more posts tagged with
Accepted answers
All comments
unknown
Yes this works quite nicely with an organization with multiple sites. The dhcp server location isn't determined by the SSID, it's determined by the device that's doing DHCP relay for you, which can be the switch or firewall at each site. The DHCP server is smart enough to see which subnet the request came from and respond accordingly.
One thing to be aware of... if the locations are close to each other, make sure the DHCP lease time is less than the time it takes to get between locations. Windows 7 has this 'helpful' feature where if it sees the same SSID it tries to keep using the same address without going through a full DHCP cycle. That one puzzled us for a very long time....
unknown
Hello FluxCapMalfunction,
I wonder if you found a workaround or solution to what you are trying to achieve.
With regards
MS
unknown
Yup. I have the same SSID at two different sites with the same VLAN ID. They both go to the FW for DHCP for Guest/Corp.
unknown
ok. Is it doable to have same SSID with different VLAN ID in different sites?
Use case - Central Office with ZD with its own FW and VLAN scheme and branch with its own. AP is connecting to ZD from remote.
unknown
In my case I actually made it the same VLANID at both sites for easier management. But i believe you can specify the VLANID on the WAPs as well.
unknown
Makes no sense - 7 AP's at once location with tagged vlan - 2 AP's at remote location with no vlan needed - DHCP comes from the firewall all on same subnet, no separate WLAN IP scheme. Should be completely transparent and automatic. Nothing more needed. So, why can't remote wireless clients see the local DHCP server out of the gate?
Quick Links
🗂️ All Categories
📄 Recent Posts
❓ Unanswered
🆘 Help
Tags
SmartZone or vSZ
RUCKUS Self-Help
Cloudpath
ICX
AP Management
vSZ
Access points
ICX Switch Management
Lennar homes
SmartZone
