How to re-create root CA on ZD?

Question

Hi. I need to re-create the root CA on my zonedirector 1100, because I am not able to see any information about ap ́s managed by zonedirector. The zonedirector is registered on the flexmaster.

Thanks

Alejandro

I have read the following post:

https://forums.ruckuswireless.com/ruc...

unknown · Answer

Hi Michael.

Sorry, It,s working now.....

Thanks

unknown · Answer

Hi Michael

I had made the certificate restore, but the issue is still happening .

Dou you have some others recommendations?

Thanks

Alejandro

michael_brado · Answer

If you’re able to SSH to your ZD, login with your admin credentials and you can reset your certificate thru the command

interface. This will restart your ZoneDirector after certificate is reset.

ruckus> en

ruckus# config

ruckus (config)# certificate

ruckus (config-certificate)# restore

ZoneDirector will restart now to apply the changes in the certificate settings.

[ and you lose your connection ]

Run a continuous ping from a DOS command prompt window, until your ZoneDirector

replies again, when you can try the HTTPS WebGUI once more.