nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

SCI 3.2 granularity

unknown

Hi
Can I select the 3-min, 15-min granularity while setting up SCI or after deployment according to requirement. I don't see any option in installation guide.

Do SCI store data in master node also. If so, shouldn't master and data nodes have same storage?

With 3.2 version, I can have 1+1 setup upto 10000 APs. But with 3.1 version, I need 1+3 setup for 12000 APs. Is this due to 2-way redundancy change in 3.2 or further optimization of application.

Thanks

Find more posts tagged with

Accepted answers

All comments

see_ho_ting

Hi,

Please see my response below. Thanks!

Can I select the 3-min, 15-min granularity while setting up SCI or after deployment according to requirement. I don't see any option in installation guide.
=> The 3-min or 15-min granularity is configured in the SZ (only for SZ3.5 and above). Please refer to the latest SCI Installation Guide -> System requirements on instructions to configure the granularity in SZ.

Do SCI store data in master node also. If so, shouldn't master and data nodes have same storage?
=> Yes, master node stores data too. And yes, they should have more or less the same storage.

With 3.2 version, I can have 1+1 setup upto 10000 APs. But with 3.1 version, I need 1+3 setup for 12000 APs. Is this due to 2-way redundancy change in 3.2 or further optimization of application.
=> Resource requirements have not changed between 3.1 and 3.2. Do look out for whether SZ3.5 is on 3-min or 15-min granularity.

unknown

Hi See Ho Ting,

My apologies. But I don't see any option in the installation guide to configure that. By increasing data nodes will it automatically increment the granularity.
What I am trying to do is, initially have a setup to 15-min granularity and test with 3-min granularity, then either revert back to 15-min granularity or increase data nodes to 3-min if required.

Thanks

unknown

Attaching vSZ config from admin guide as well.

unknown

Attaching admin guide snapshot as well.
Image_ images_messages_5f91c43d135b77e2479dc4be_1ce6915a7bfab1d658dbc8a6da07f7b1_RackMultipart20171026382221gz9-2bb66701-e1ef-4383-ba76-f8321bea8cf3-1092542862.JPG1508997928

Image_ images_messages_5f91c43d135b77e2479dc4be_1ce6915a7bfab1d658dbc8a6da07f7b1_RackMultipart20171026382221gz9-2bb66701-e1ef-4383-ba76-f8321bea8cf3-1092542862.JPG1508997928

see_ho_ting

It's on page 8 of the SCI 3.2 Installation Guide.

Image_ images_messages_5f91c43e135b77e2479dc8cc_ed955a0b487816cc2e973afaa10239ba_RackMultipart20171026645961lzl-adc59db2-717d-4fc7-b57a-5df497ab8664-26460643.png1509032442

Image_ images_messages_5f91c43e135b77e2479dc8cc_ed955a0b487816cc2e973afaa10239ba_RackMultipart20171026645961lzl-adc59db2-717d-4fc7-b57a-5df497ab8664-26460643.png1509032442

unknown

Oops. My bad. Thanks a lot.