BACK TO SUPPORT PORTAL
RUCKUS Technologies
Wired
Wireless
Cloud Services
Miscellaneous
RUCKUS Lennar Support
Lennar Knowledge Base
RUCKUS Lennar Support
Resources
Community
Technical
Register
RUCKUS Technologies
Home
RUCKUS Technologies and Products
SmartZone and Virtual SmartZone
AP don't join to vSZ on 3.5.x.
unknown
Hi.
Some APs don't join to vSZ on 3.5.x.
I captured packets between Ap and SZ.
It shows "encrypt alert" same as below again and again.
I have also tried it at another vSZ.
It happens same.
Anyone exprienced?
Regards.
Find more posts tagged with
Accepted answers
All comments
unknown
Have opened the Ports on Firewall
unknown
AP and vSZ is located on Routing path without FW.
Because we tested it on vsz-E, it have no staging-zone.
unknown
All those AP's are Hard reset? if not do hard reset.
martin_martin
What version software is running on the AP?
can you ping the vsz when you logged into the AP?
regards
Martin
unknown
vSZ version is 3.5.1.0.296.
AP's version which join to vSZ is 104.x and 9.13.x.
Ping is good.
I'll update futher info after another test.
martin_martin
So for 104.x you need to use
Set scg ip x.x.x.x
and for 9.13.x lwapp2scg needs to be enabled. Although i suggest you to load 104.x.x.x code to the AP .
Kind regards
Martin
Quick Links
🗂️ All Categories
📄 Recent Posts
❓ Unanswered
🆘 Help
Tags
SmartZone or vSZ
RUCKUS Self-Help
Cloudpath
ICX
AP Management
vSZ
Access points
ICX Switch Management
Lennar homes
SmartZone
