nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Overlapped Subnet IP range

unknown

I am having problem with Ruckus R710 Subnet configuration:

I have configured Local Subnet 1 with following:

Enabled
Local IP: 192.168.40.1
Mask: 255.255.255.0
DHCP: Enabled
Starting Address: 192.168.40.10
Maximum DHCP Users: 240
Access VLAN: 40

When I try to configure Local Subnet 2 with following:

Enabled
Local IP: 192.168.50.1
Mask: 255.255.255.0
DHCP: Enabled
Starting Address: 192.168.50.10
Maximum DHCP Users: 240
Access VLAN: 50

I get message:
Overlapped Subnet IP range

But I cannot understand why would it be? I have even tried further spread subnets like: 192.169.50.1 or something else, but still get same message...

Find more posts tagged with

Accepted answers

All comments

martin_martin

Hi Petar,

Which software are you running on the R710 ?

Kind regards
Martin

unknown

Software Version:
100.2.0.0.336

unknown

I am having same issue; On contrary R700 is stable and allow me to do this.
I think this is a bug that has been for a while in R710 and not taken care of.

unknown

do you solved this problem ?

unknown

No, changed to bridge mode so dont need it anymore

unknown

Just updated the firmware and worked fine since then

unknown

Thankyou, I upgrade to version 104.0.0.0.1347 and works excelent !