nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

vSZ- Rebooting all APs at once

Is there a way to reboot ALL AP's at once, or to reboot ALL "model AP" at once?

Hi, i have the next issue,

Controller: virtual smart zone with two zones: 5.2.1.0.515 and 3.6.2

issue: all ZF7982 in zone 3.6.2 report high cpu utilización (98%-100%), when our prtg shoot the alarm "cpu 100%", the ap (randomly) presents in "Access point-events"----->"heartbeat loss", then, ap "disconnect"

ping to IP ( ap "disconnected") is ok

my ssh loging is slow

we have 200 ap zf7982, i want to reboot all aps at once, is it possible? how can i do it?

Abs.

Find more posts tagged with

Accepted answers

All comments

Hi Abs,

Have you seen this thread? Looks like it may/may not work if you are running SZ 5.1 or newer:

https://forums.ruckuswireless.com/conversations/access-points/is-there-a-way-to-reboot-all-r710s-at-once/5f91c3db135b77e2478b261b

Best,
Darrel.

naresh_kumar_74

Hello Abs,

The below AP CLI script commands are blacklisted from 5.1 and above software releases.

reboot
set factory
set scg reset
set scg init
set scg ip
set scg disable/enable
set hub disable/enable
set interface
set password
set login

We have the below command to reboot individual Aps.

ruckus# reload ap <MAC address of the AP>

Hope this helps.

Regards,

Naresh Kumar

@naresh_kumar_7493781 so gratefull!

thanks,

i applied the next ap cli in format .kps

_________________________

model=ZF7982

reboot now

_________________________

To execute i selected in system- the 3.6 zone.

🙂

@darrel_rhodes

thanks!!! actually.. it works! with virtual smart zone V5.2.1

naresh_kumar_74

Hello Stefany,

Glad to know that it worked.

Regards,

Naresh Kumar

Has any of this been tested on vSZ-E 6.1.0.0.935?

Would rebooting the controller cause the AP's to reboot?

Thanks,

zinker

Hi Zinker,

Yes, process provided above should work in 6.1.0 as well.

Rebooting controller will not reboot the APs.

Reboot says it is a blacklist command like Naresh mentioned. Is anyone using the command in SZ 6.1 successfully despite it being blacklisted?

Sorry, I did not load "more replies," to see Zinker518 and moderators reply.

Quick Links

Tags