Hi we are aligning our AP Group due to the max number of AP's in a Zone. Is there a way we can move AP Group including AP's under it to a new Zone?
Have not done this, you are lucky you have AP-s, we think now it is never going to happen, because of the shortage 🙂
May be it is easiest to select all ap-s in the group and move to another zone and then to a group. Group does not have too many parameters to restore. But if you have 50+ groups, it is another story.
@toomas_kadarpik
yes we have around hundreds of AP groups we need to move. Looking for an easier way to do it in bulk. Thanks!
Hi,
you can to make template from the zone and create new zone from template. Than it will be easy to move APs, as most configuration will be already there.
Hi Mark,
AP groups cannot be moved between the zone.
Please use Clone option, it will create identical Zone with all the AP groups inside it. Once done, you can move the APs from one zone to another.
@syamantak_omerThank you so much we'll try this out
Can't believe noone responded to this with the most obvious question....why is moving or cloning a group to another zone not possible? That seems so intuitive but smartzone isn't capable of doing that. HUGE fail.
