BACK TO SUPPORT PORTAL
RUCKUS Technologies
Wired
Wireless
Cloud Services
Miscellaneous
RUCKUS Lennar Support
Lennar Knowledge Base
RUCKUS Lennar Support
Resources
Community
Technical
Register
RUCKUS Technologies
Home
RUCKUS Technologies and Products
Access Points - Indoor and Outdoor
The ZD 1200 controls ZF R700 not connected ZF T301 s.
unknown
O ZD 1200 controla ZF R700 e conectou ZF T301 s à rede, o ZD 1200 localiza, mas não configura automaticamente. O que devo fazer?
Find more posts tagged with
Accepted answers
All comments
michael_brado
Trying to connect R700 and T301 to a ZD1200 controller? What version code on your ZD please?
Do APs connect but not get configured? Perhaps you need FW ports opened if APs and ZD are not local to each other.
See your ZD version User Guide, like this 9.13 GA example:
https://support.ruckuswireless.com/documents/1106-zonedirector-9-13-ga-user-guide
and see FW ports that must be open for ZD/AP communications, starting on page 43.
Table 11. Firewall ports that must be open for ZoneDirector communications
unknown
Version 9.13.1
The ZD 1200 and the APs are in the same network. The R700 Ap's are connected, only the T301s that the ZD 1200 automatically configures.
michael_brado
Not sure, Tech Support could analyze ZD debugs for your T301 AP connections with the right filters.
Can you schedule a change management period, save a ZD backup, and try an upgrade to 9.13 (MR3)?
https://support.ruckuswireless.com/documents/1240-zoneflex-9-13-3-mr3-release-notes
https://support.ruckuswireless.com/software/1108-zd1200-9-13-3-0-22-mr3-software-release
unknown
You need a premium account, I do not have one.
unknown
Would you help me to download this firmware?
michael_brado
T301s is supported by 9.13.1 (GA) and later ZD firmware. Upgrades were free for 90 days from date of purchase,
but a support contract is required for further downloads and KBA access. If you do not have support to download
the latest firmware, which was only a suggestion, please troubleshoot your AP connection problem from the ZD
debugs/syslogs and be sure you have opened the FW ports described in the user guide. Have you tried rebooting
the T301s or a factory default on them? Are you sure they get IP from your DHCP server (do you see their MACs
in the DHCP server assigned table)? Can you ping them? Do they appear under ZD's Monitor AP page at all (pending
approval or not appearing at all)? This would indicate that they are able to exchange LWAPP.
Quick Links
🗂️ All Categories
📄 Recent Posts
❓ Unanswered
🆘 Help
Tags
SmartZone or vSZ
RUCKUS Self-Help
Cloudpath
ICX
AP Management
vSZ
Access points
ICX Switch Management
Lennar homes
SmartZone
