nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

why can not using the sampe ip address ?

unknown

Hi guys, when i first setup virtual smartzone 3.6.1 in the option section for control,cluster,management. I have to fill in the ip address alternately. Why can not use the same ip address ?
Thanks

Find more posts tagged with

Accepted answers

All comments

unknown

Hello Tryono,

By default, the .ova builds a VM with 3 network interfaces. it sounds like you just want to build a 1-interface vSZ.

If you want to build a SZ with a single IP, then follow these steps:

1. Power-off the VM
2. Go to the VM settings, delete virtual NICs 2 & 3
3. Power-up the VM.

Continue with the set-up steps again.

James

paul_van_der_cr

depends on how network interfaces you have, default the image has 3 interfaces, you can remove 2 interfaces before running the first time, then you only can/have to use one ipaddress

unknown

Hello James,

ok i will try it. thanks before.

unknown

Hi Paul, thanks, i will try remove 2 interface.

unknown

Hi James, how if disconnect port ? is it the same with delete interface ?

unknown

Hi Paul, how if the disconnect port ? Is it the same with remove interface ?

unknown

Image_ images_messages_5f91c473135b77e247a97646_1fc4e3aa76e469fa2b8e7b4e7ad57be2_RackMultipart201810238581xf85u-d891bb05-c879-44f9-99f7-69545fa6b06f-843995112.jpg1540260113

Image_ images_messages_5f91c473135b77e247a97646_fd6c09f56fc50317afcc20588fa23e95_RackMultipart20181023179731si6-9570549f-b8b6-4f1c-a197-b48dda82d529-1047806377.jpg1540260136

karthik

Hi ONOS,

Remove the interfaces. While the vSZ comes online for the first time it will check the interfaces available in VM and assign to mgmt, ctrl, clstr. Disconnecting means still its available, still vSZ will assign as 3 interfaces.
Simply, after you deploy VM image, delete NIC2 and 3 and first-start. Note: VM wizard in VMware has default option to start VM, You may need to uncheck that.

HTH
Karthik