How do I get OIDs to obtain information from APs controlled by Virtual
SmartZone 3.6.2?

Question

I had downloaded the mibs from the link below, but I don't have the OIDs I want:https://support.ruckuswireless.com/software/1869-smartzone-3-6-2-mr2-snmp-mibs-for-sz-100-and-vsz-e-zip-b509 I wanted the OIDs to be inserted into Zabbix, for monitoring the connection status of the AP, the number of clients connected, and the CPU usage of the AP.

unknown · Answer

This is correct, use a MIB browser (or even snmpwalk) to find the needed OID.

michael_brado · Answer

I found some advice in a KBA-3141: MIB files for Zabbix tool

--Since Zabbix  files do not  support MIB files, we need to convert the MIB files into XML format .

--We can convert  MIB files into XML format by using the link:http://www.snmpsource.com/snmp_mib_viewer.asp

--Once after converting we can upload the file into zabbix tool,which helps to monitor the network.

unknown · Answer

I managed to get them into zabbix. You need to use the stand alone AP mibs and then maybe play around with a mib browser

See here https://support.ruckuswireless.com/so...