nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Get CLI config files of ZD ,like cisco's show run

unknown

I want to use a cli like cisco's 'show run' to get the cli configuration. And then enter this configuration to a new deivce by CLI.

I know the show config, but it is not a kind of CLI command. 't re-enter the output of "show conf" to restore a config.

Find more posts tagged with

Accepted answers

All comments

john_d

The ZoneDirector stores it's config in a database that you can back up then selectively restore (e.g. Configuration only) via the WebUI. Is doing it at the command line a must?

unknown

Thanks for your reply. Yes, if it support backup cli configuration could be better.

You means ZD does not support this feature?

michael_brado

Neither ZoneDirector nor Standalone APs have a complete text configuration file backup/restore capability. You can script some CLI configuration of common settings or WLANs, but not a full backup/restore file.

You can save a configured ZoneDirector backup file, and install it on a new ZD,

leaving that ZD's IP address and login credentials, in order to "clone" another/new

ZD with an existing/working configuration, which is sometimes helpful. This is

done thru the ZoneDirector WebUI too though, not a CLI method.

unknown

Thanks!

unknown

Would be nice if there's a CLI command that we can enter to get ZD's complete configuration. This will be useful if we want to load configuration from one ZD model to a different model (for testing purposes, for example).

michael_brado

Hello M, ask your Ruckus account rep to add your vote to feature request FR-1489: Restore ZD backup via CLI.

nbctcp

If I understand correctly.
I can do these in ZoneDirector.
-backup config from gui
-let say I lost the password
just reset to factory default
-set new password
-restore config
my new password still intact (won't be overwrittern by restored config)

if correct
can I do the same thing with vSZ

tq

unknown

i think password in backup file will get applied to the controller...pls chk with support on this be sure...

unknown

Any idea if that cli has been made available. support has requested to share flashbackup to replicate some issue, however as per info-sec policies I can share the config file without changing some details of the file.