nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

R310 Burst To maximum 50 APs Capacity

unknown

Hi everyone
I need to know about design unleashed solution.
We need to use one Unleashed cluster for a network.
I have hardware is
Ruckus R310 = 5
Ruckus R320 = 5
Ruckus R510 = 23
Brocade ICX Switch = 2

Above hardware , We can using unleashed solution ?

Find more posts tagged with

Accepted answers

All comments

michael_brado

Yes, Unleashed version 200.7 (any release) will support R310, R320, R510 model APs, up to 50.
Unleashed 200.8 will recognize ICX switches running FI 08.0.90+, but does not support R310 models any more.

unknown

Hi Michael
200.7 for R310 is support up to 50 in a cluster right?

sanjay_kumar

Hi Samun,

Yes, that is right.

georgekobi

Hi,

I have R310 and R320 models upgraded to R310_200.7.10.202.127.bl7, but still only 25 APs are connected to the cluster. The gateway mode is off, as i use brocade core switch as a gateway. Any ideas what did i miss?

vasanth_edward

Hi @georgekobi

Thank you for writing to us.

As per 200.7.x Release Notes, there are 2 conditions to be met to create 50 APs Unleashed Network

1) All the APs must be 802.11ac Wave 2

2) Master must not be in Gateway mode.

However, in this case R310 is 80211ac Wave 1 AP and hence, only 25 APs Unleashed network can be set up.

Hope this helps.

Regards,

Vasanth Edward